MODEL- PDUMH20ATNET       VENDOR- TRIPPLITE
    
FEATURES- Switched, Metered PDU with ATS
       Power Distribution Unit with dual-input Auto Transfer Switching,
        individual outlet control and SNMP network interface!
       1U rackmount PDU with digital current monitoring display; 20A 120V 
        capacity with 16 NEMA 5-15/20R outlets; Connects to NEMA 5-15R 
        and locking L5-20R receptacle; Integrated Automatic Transfer Switch 
        (ATS) allows PDU to operate from secondary input source when 
        primary input fails; Sequential outlet power-on prevents inrush-
        related equipment interaction on startup; Programmable or real-time 
        monitoring and outlet power control via secure web/network 
        interface.
       Tripp Lite's 120V 20A metered PDU system with Automatic Transfer 
        Switching (ATS) is an 16 outlet PDU with a digital display to 
        indicate total PDU power consumption in amps. Outlets are 
        sequentially turned on at 250 milliscond intervals when the PDU is 
        first energized from an unpowered state to prevent inrush-related 
        equipment interaction on startup. Installed web/network monitoring 
        card enables remote power monitoring and control. Remotely displays 
        status of input power, load capacity, and outlet power status via 
        secure network or web browswer interface. Offers individual outlet 
        control to power on, off, or cycle AC output to regain control of 
        locked-up servers and other network devices. Load ramping and 
        shedding provides automatic power management. Supports notification 
        and logging of input power status, event notification, output power 
        and load conditions. Supports 1U rackmount installation in a 2 or 4 
        post racks. Included are 16 NEMA 5-15/20R outlets, and optional-use 
        dual cords for auto- transfer switching (ATS) options. Each input 
        plug supports 5-20P and L5-20P input.
       Optional integrated ATS is available for use when two separately 
        derived input power sources are available. The attached power cord 
        serves as the primary AC input cable, while the included detachable 
        power cord serves as the optional-use secondary AC input 
        connection. The PDU system passes the primary input power through 
        to connected equipment whenever line voltage and frequency levels 
        are normal. If the primary input source goes outside of these 
        tolerances or fails altogether, the ATS will automatically switch 
        all PDU output to the secondary line sourced input power (when 
        available) to maintain continuous operation of connected loads 
        without reboots or service interruptions. Once the primary power 
        source is restored, the PDU will automatically switch back to 
        primary sourced input power. The dual input cabling can be 
        configured for UPS maintenance bypass of standard UPS systems or to 
        create a redundant dual-UPS power source for a critical, single-
        corded network device. Front AC input LED's show what input AC 
        source is being utilized by the PDU.
    Includes PDU with attached L5-20P input power cord, Detachable C19 to 
      NEMA L5-20P 12 ft / 3.6m power cord for optional secondary input,
      Two NEMA L5-20R to NEMA 5-20P plug adapters, User manual with 
      warranty information.
* 120V 20A metered PDU system with Automatic Transfer Switch (ATS).
* Dual input cords, one attached (primary) and one optional-use detachable 
  cord (secondary).
* Included cordsets support 5-20P and L5-20P plug-in connections via secure 
  adapters.
* Front panel digital ammeter displays power consumption in amps 
* Web/Network monitoring card enables remote power monitoring and control 
  of power to each outlet.
* Sixteen built-in NEMA 5-15/20R output receptacles 
* Optional ATS function enables setup for hot-swappable UPS maintenance 
  bypass, dual UPS protection or dual AC input redundancy for critical 
  single-corded network hardware.
* Small 1U rackmount format installs in only one rack space with a maximum 
  installed depth of 14.5 inches.
* Also supports 0U vertical mounting in the cable managment area of many 
  rack enclosures.
* Individually controlled outlets provide load management to networked 
  equipment.
* Sequential outlet turn on eliminates power up in-rush of connected 
  devices on initial start-up.
    
  -- SPECIFICATIONs -----------------------------------
OUTPUT       - Volt Amp Capacity  : 20A/2400VA
               Nominal voltage    : 120V
               Outlets            : (16) NEMA 5-15/20R 
               Customized load 
                  management 
                     receptacles  : (16) individually controlled load 
                                         management receptacles.
INPUT        - Input amps         : 20A 
               Connection type    : (2) NEMA L5-20P with 2 NEMA 5-20P plug 
                                       adapters.
               Cord length        : Both input cables are 12 ft / 3.6m - 
                                      the cables each terminate to a L5-20P 
                                      locking plug on the input side. Two 
                                      included 6 inch plug adapters convert 
                                      the locking plugs to NEMA 5-20P 
                                      plugs.
               Recommended 
                electrical service: 120V 20A, dedicated line recommended
LEDs, ALARMS & SWITCHES-
               Front panel LEDs   : 16 front panel LEDs display power on -
                                      off status for each outlet, plus 
                                      2 LEDs for power status on each input 
                                      line cord. Digital Current Meter 
                                      displays output power consumption in 
                                      amps.
MATERIAL     - Steel
FORM FACTOR  - 1U rackmount
COMMUNICATION- SNMP compatibility: Yes, via pre-installled SNMPWEBCARD. 
                 Provides remote monitoring, outlet control, and automatic 
                 power management configurations.
APPROVALS    - Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 
                  (Canada), RoHS Compliant.
DIMENSIONS   - 17.5"w x 1.75"h x 14.5"d          WT.- 12.2 lbs.
www.tripplite.com